DIRECT CONDENSATE RETURN SYSTEM (SAVE TANK)

A & S THAI WORKS CO., LTD

Direct condensate return system, Save up to 12% of your boiler fuel oil consumption and save boiler feed water and boiler chemicals. 

  • For all types of steam heated driers, cookers and sterilizers that use indirect heating.
  • The system pumps the pressurized hot condensate directly into the boiler in a completely closed system and without loss of flash steam.
  • Example (see chart): a drier operating at 6 bar steam pressure will lose 12% flash steam after the steam trap when condensate boils to reduce the temperature from 164˚C to 100˚C.
  • Automatic operation; if the pump stops, the system automatically switches over to normal steam trap operation.
    Single or multiple boiler installation controlled by PLC.

The system comes in a compact unit and consists of:

• Receiver tank (certified for 10 bar). 

• Flow controllers and level switch.

• Electric control panel. 

• Installation and commissioning included.

• Dimension: W 2.0 x D 2.0 x H 1.90 (m)

** Note: One unit is required for each drier.

• Receiver tank (certified for 10 bar). 

• Flow controllers and level switch.

• Electric control panel. 

• Installation and commissioning included.

• Dimension: W 2.0 x D 2.0 x H 1.90 (m)

** Note: One unit is required for each drier.